Replacing silicone around a bath and vanity in Southbank

This is a sample write-up showing how a project is described. It is not a completed customer job.

The problem

The old silicone had gone grey and was lifting at the bath edge, with dark spots creeping into the joint. In a small apartment bathroom the owner wanted the joint reset before moisture got behind it.

What we did

1. Cut out all of the old silicone and removed the residue from both surfaces.
2. Cleaned and degreased the joint, then let it dry fully.
3. Masked either side of the joint to keep the line crisp.
4. Applied a mould-resistant sanitary silicone in one continuous run and tooled it smooth.
5. Pulled the masking and left the joint to cure before use.

The result

The bath and vanity joints are clean and unbroken, and the bathroom looks noticeably fresher.